Influence of the position of the nitro group on the structural and spectroscopic characteristics of N"-(nitrobenzylidene)isonicotinic hydrazides in the crystalline state

N"-Substituted isonicotinic hydrazides of the general formula Py—C(=O)—N(H)-N"=C(H)—R, where R is o- (1), m- (2), or p-nitrophenyl (3), were studied by IR spectroscopy and X-ray diffraction analysis. The position of the nitro group in these compounds has no effect on the type of the crystal structure. The crystal packings are based on stacks consisting of antiparallel planar molecules. The molecules from the adjacent stacks are linked to each other via the N—H...N_Py hydrogen bonds. Depending on the position of the nitro group, the N...N_Py distance increases in the series 3 > 1 > 2 and the energy of the hydrogen bonds decreases (according to the IR spectroscopic data) from 3.9 to 3.1 kcal mol^–1. Analysis of the IR spectra demonstrated that the intensity of absorption in the (C—H) stretching region of the pyridine ring increases substantially as the the N—H...N_Py hydrogen bond is strengthened. Some regularities of the changes, which are observed for the (NO₂) bands in the spectra of the nitrophenyl-containing conjugated molecules in solutions, persist in the crystalline state.     

紫外预电离TEA CO2激光器放电特性的实验研究

 横向激励大气压（transversely excited atmospheric,TEA）CO₂激光器的放电稳定性是决定该类型激光器应用效果的关键因素。通过对采用电感充放电电路的紫外预电离激光器的实验研究，得到了激光器放电动态过程的规律，并发现残余振荡是主放电后发生弧光放电的主要原因。实验中采用不同配比的气体，并对电感充放电电路与改进后的硅堆充放电电路进行了比较。实验结果表明：增加充电电感值可以降低主放电结束后储能电容上的残余电压；而采用硅堆放电电路在主放电后仅有相对幅值很低的稳定残压，两种方案都大幅度抑制了弧光放电的形成，有效地提高了激光单脉冲能量。     

大气相干长度的昼夜观测

 介绍了利用差分像运动测量法测量光波到达角起伏方差来确定大气相干长度的方法，阐述了一种能对大气相干长度进行昼夜测量的日夜两用型大气相干长度仪的测量原理与结构,经过长期昼夜观测分析得知: 整层大气湍流强度有随时间变化的趋势，这种趋势与近地面层的湍流强度的时间变化特征基本吻合，即在日出后和日没前两段时间内的相干长度值远大于其它时间段内的值。     

Analysis and modeling of radiometric error caused by imaging blur in optical remote sensing systems

Imaging blur changes the digital output values of imaging systems. It leads to radiometric errors when the system is used for measurement. In this paper, we focus on the radiometric error due to imaging blur in remote sensing imaging systems. First, in accordance with the radiometric response calibration of imaging systems, we provide a theoretical analysis on the evaluation standard of radiometric errors caused by imaging blur. Then, we build a radiometric error model for imaging blur based on the natural stochastic fractal characteristics of remote sensing images. Finally, we verify the model by simulations and physical defocus experiments. The simulation results show that the modeling estimation result approaches to the simulation computation. The maximum difference of relative MSE (Mean Squared Error) between simulation computation and modeling estimation can achieve 1.6%. The physical experimental results show that the maximum difference of relative MSE between experimental results and modeling estimation is only 1.29% under experimental conditions. Simulations and experiments demonstrate that the proposed model is correct, which can be used to estimate the radiometric error caused by imaging blur in remote sensing images. This research is of great importance for radiometric measurement system evaluation and application.     

The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

Influence of processing and clay type on nanostructure and stability of polypropylene–clay nanocomposites

Melt processing is a critical step in the manufacture of polymer articles and is even more critical when dealing with inhomogeneous polymer–clay nanocomposites systems. The chemical composition, and in particular the clay type and its organic modification, also plays a major contribution in determining the final properties and in particular the thermal and long-term oxidative stability of the resulting polymer nanocomposites. Proper selection and tuning of the process variable should, in principle, lead to improved characteristics of the fabricated product. With multiphase systems containing inorganic nanoclays, however, this is not straightforward and it is often the case that the process conditions are chosen initially to improve one or more desired properties at the expense of others.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

Deposition of ZnS thin film by ultrasonic spray pyrolysis: effect of thickness on the crystallographic and electrical properties

Zinc sulfide (ZnS) thin films have been deposited on Si (1 0 0) substrate using ultrasonic spray pyrolysis. X-ray diffraction (XRD) analysis revealed that the films are (0 0 2) preferentially oriented with c-axis-oriented wurtzite structure. The crystallinity has been found to improve with film thickness in the 180–6000 nm range. Film structure has been analyzed by XRD, scanning electron microscope, FTIR, and Raman spectroscopies, while the stoichiometry has been verified by energy-dispersive spectroscopy and particle-induced X-ray emission techniques. Electrical properties of the grown films were characterized by current–voltage and capacitance–voltage measurements where, the films show better conducting behavior at higher thickness.     

Light intensity and image visualization of GDI injector sprays according to nozzle hole arrangements

The light intensity measurement and image visualization of multi-hole injection spray due to different hole arrangements and hole numbers were investigated. The light intensities and behavior characteristics of the GDI spray were analyzed through the axial and diagonal spray penetration, cone angle, and spray area from the spray images by using the image visualization system and image analysis system. The atomization performance of GDI injectors was analyzed by the local and overall Sauter mean diameter (SMD) measurement.